Low Cost Flowtech 49154FLT Afterburner Headers

Flowtech 49154FLT Afterburner HeadersBuy Flowtech 49154FLT Afterburner Headers

Flowtech 49154FLT Afterburner Headers Product Description:



  • Patented Velocity Tube increases cylinder scavenging
  • Tuned-length primary tubes combine with Velocity Tube to smooth out exhaust pulses
  • Big 3 secondary collector for reduced back pressure
  • Horsepower and Torque increased over conventional header design
  • Premium high-temperature electrostatic gray finish

Product Description

These Afterburner Flow Tech I standard headers were designed for 1988 to 1995 Chevy/GMC 1500/2500/3500 trucks. Great for street performance with their mandrel-bent tubing for smooth exhaust flow. Tube size is 1.625" and the collector size is 3" and they are made with light weight and sturdy 16-gauge tubing, low back pressure and sturdy, leak tested O-ring port sears and coated with grey high temp finish. These headers are engineered for a precision fit and easy to install with all mounting hardware included.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
4Great product
By Gary G. Kish
I used these headers on a LT1 350 V8. I've put headers on about 80% of the cars and motorcyles I've owned and these where the best. There was no pause or waiting for the tach to climb before the power hit. It was instant! Very strong low and mid range, yet still have the big power scream on top. Other long tube headers always seemed gutless down low, until they hit. I never thought much of it until I tried the Afterburners (great name)and had no lag or waiting. It later showed on the before and after dyno run I had. I have to dig it up as it started as soon as the dyno operator was able to hit the throttle (I think at 2,000-2,500 rpm) It showed the same power increase right though the run, with no dips or peaks. The car felt like it had a big block in it after I installed them.I had sent them to Jet-Hot before I installed them just to keep the temps down but I don't believe that had anything to do with the hp increase. This is a weird design for headers but so are most cars that have factory tubes over a manifold and I believe the Nascar ones are very similar to the Afterburners design. It's not easy getting a patent and Flowtech has it with the Afterburner design which says something.I would only recomend you properly coat them, not only to keep heat down but to make sure they don't rust (which everything but stainless seems to). If you Jet-Hot them, don't spill oil on them afterwards. It ruins the look completely when it bakes. I also ran them with an X Type and dual mode mufflers. It was the wildess sounding Roadmaster LT-1 in Michigan, and with the torsen rear diff and low gear pretty darn fast!Gary

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Flowtech 49154FLT Afterburner Headers

Discounted Flowmaster 95401012 10 Series Delta Force 4.00" Center In and Out 16-Gauge Aluminized Steel Race Muffler

Buy Flowmaster 95401012 10 Series Delta Force 4.00" Center In and Out 16-Gauge Aluminized Steel Race Muffler

Flowmaster 95401012 10 Series Delta Force 4.00" Center In and Out 16-Gauge Aluminized Steel Race Muffler Product Description:



  • Durable fully welded 16 gauge aluminized steel - single chamber race muffler
  • Minimal decibel reduction over open headers
  • No internal packing to blow-out
  • Race proven patented delta flow technology - designed for maximum horsepower and torque
  • 4" inlet/outlet

Product Description

The single chamber 10 Series race muffler is intended for racing applications and utilizes Flowmaster's patented Delta Flow technology for maximum performance. Recommended for racing applications where a muffler is required without a set decibel limit to be met. It will provide a noticeable dB reduction over open headers.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
5Using this on my Cummins Diesel!
By M. Ingram
Great 4" in/out Flowmaster muffler for the $$! I am using this on my Cummins Diesel with a 4" exhaust system!

1 of 1 people found the following review helpful.
5money well spent!
By John M. Shanker
I purchased a set of these for my mustang and damn!!!!!!!!!!! do they sound good. Now, i do have a cam, shorty headers, x-pipe incorperated with my 306 but I do believe that these would sound great ony a stock vechile as well. I swapped my super 44's for these and it is quietier inside the car which is nice and better sounding outside. Personally, my rpm's have dropped about 200 at cruising speed which was a nice suprise, and i assume that is because there is less resistance because of the one vs two chamber setup i had before. anywho, I like, maybe you will. P.S. I don't have dumps, straight out the rear, or could be real loud!!!!

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Flowmaster 95401012 10 Series Delta Force 4.00

Cheapest Flowmaster 9530572 50 H.D. Muffler - 3.00 Center IN / 2.50 Dual OUT - Moderate Sound

Flowmaster 9530572 50 H.D. Muffler - 3.00 Center IN / 2.50 Dual OUT - Moderate SoundBuy Flowmaster 9530572 50 H.D. Muffler - 3.00 Center IN / 2.50 Dual OUT - Moderate Sound

Flowmaster 9530572 50 H.D. Muffler - 3.00 Center IN / 2.50 Dual OUT - Moderate Sound Product Description:



  • Moderate to aggressive exterior exhaust tone
  • Reduced interior resonance
  • Recommended for dodge ram hemi and diesel trucks
  • Improved horsepower/torque and potential mileage improvement
  • Race proven patented delta flow technology

Product Description

Designed primarily for today's heavy duty gas and diesel trucks, this muffler will deliver improved performance, throttle response and mileage. Featuring a deeper, moderate tone with minimal resonance, it is ideal for trucks with modified engines. Constructed of 16-gauge aluminized steel and fully MIG-welded for maximum durability.

Customer Reviews

Most helpful customer reviews

0 of 1 people found the following review helpful.
5buy flowmaster muffler
By thomas clark
i have always liked flowmaster mufflers , sound great and makes my truck run strong, i will tell my friends about it

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Flowmaster 9530572 50 H.D. Muffler - 3.00 Center IN / 2.50 Dual OUT - Moderate Sound