Discounted AEM 21-433B Blue Cold Air Intake System

AEM 21-433B Blue Cold Air Intake SystemBuy AEM 21-433B Blue Cold Air Intake System

AEM 21-433B Blue Cold Air Intake System Product Description:



  • AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality - Excluding intake systems that are designated as Off-Road Use Only.
  • Guaranteed for life

Product Description

AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Above and beyond all the rest
By Bryan Quick
I researched CAI (cold air intakes) atleast 2 to 3 weeks before I decided with AEM. I was inpressed with the shipping via Amazon, but further more the quality of AEM was just top notch. My other choice was Injen, but since I could not find enough backing info to choose them over AEM. To back my choice I research sound on utube and other web forums. Sound quality is pretty deep and low end torque is very on point. I can't tell about HP gain, but I bet its there somewhere. The stock setup in a eclipse 4 banger is horrible. Good luck to all that read this and remember if your driving in heavy water areas you should get a bypass to save your engine. My ride is a spring/summer/fall and never sees rain nor snow. visit my ride @ http://www.cardomain.com/ride/3014140

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy AEM 21-433B Blue Cold Air Intake System

Cheapest AEM 21-413R Red Cold Air Intake System

AEM 21-413R Red Cold Air Intake SystemBuy AEM 21-413R Red Cold Air Intake System

AEM 21-413R Red Cold Air Intake System Product Description:



  • AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality - Excluding intake systems that are designated as Off-Road Use Only.
  • Guaranteed for life

Product Description

AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5great product
By Bryan
I bought this for my 96 Honda civic DX and this baby works great, my car runs faster and has little bit of a sound when it runs. Installation took about an hour and comes with detailed instructions. AEM makes great stuff and I will definitely be buying more products from them. Worth it!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy AEM 21-413R Red Cold Air Intake System

Best aFe 54-10419 Air Intake System

aFe 54-10419 Air Intake SystemBuy aFe 54-10419 Air Intake System

aFe 54-10419 Air Intake System Product Description:



  • Increases horsepower
  • Increases air flow, torque and throttle response
  • Allows vehicle to breathe better
  • Easy installation

Product Description

aFe's cold air intake tube replaces the factory tube. It upgrades the Stage 1 system by increasing the amount of air flow, torque, and throttle response. It reduces heat transfer to air intake, allowing your vehicle to breathe better.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5AFE system is great
By mij
AFE intake is great. Easy to install raises horsepower and fits just as advertized. Come with easy to read instructions. Made of strong material. Amazom does a great job of having the part in stock and ships really fast. Thanks.

0 of 0 people found the following review helpful.
4tubular air man!
By iDiotgear
I actually bought it for another truck that I used to cut down and fit. The quality of the intake is great and the inside portion is nice and smooth to control air while the outside has a good texture. Only complaint I have is that it's pretty pricey for a piece of plastic. $50 would be more than fair for this.

0 of 0 people found the following review helpful.
35.9 turbo tube
By Jeff Good
This is a well built product but it really only fits well with their air box. I have an Mean Green aftermarket air cleaner and I have to remove the tube to change my oil now. Tried it with the factory box same thing as well. So if you are gonna buy this item I suggest the air box too.

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy aFe 54-10419 Air Intake System

Price Comparisons of aFe 54-10162 Air Intake System

aFe 54-10162 Air Intake SystemBuy aFe 54-10162 Air Intake System

aFe 54-10162 Air Intake System Product Description:



  • Stops more dirt and dust while reducing engine wear
  • Increases horsepower and torque
  • Improves fuel efficiency and throttle response
  • Includes instructions and hardware for easy installation
  • Uses factory mounting points

Product Description

aFe's cold air intake system replaces the existing OE air box and filter to stop more dirt and dust while reducing engine wear. It is designed to add horsepower and increase mid-range torque, along with improving fuel efficiency and improving throttle response. The cold air intake system includes the air box, filter, instructions and hardware for easy installation. The air intake system uses factory mounting points.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5CAI
By daniel dacanay
This cold air intake is a worth while addition and i would recommend it to anyone. Gives your vehicle a nice growl when accelerating and adds horsepower at the expense of using more gas, but if you don't drive to racey it seems to actually increase your gas mileage

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy aFe 54-10162 Air Intake System

Best aFe 54-10072 Cold Air Intake Kit

aFe 54-10072 Cold Air Intake KitBuy aFe 54-10072 Cold Air Intake Kit

aFe 54-10072 Cold Air Intake Kit Product Description:



  • Stops more dirt and dust while reducing engine wear
  • Increases horsepower and torque
  • Improves fuel efficiency and throttle response
  • Includes instructions and hardware for easy installation
  • Uses factory mounting points

Product Description

aFe's cold air intake system replaces the existing OE air box and filter to stop more dirt and dust while reducing engine wear. It is designed to add horsepower and increase mid-range torque, along with improving fuel efficiency and improving throttle response. The cold air intake system includes the air box, filter, instructions and hardware for easy installation. The air intake system uses factory mounting points.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
4I can breath!
By G. Nolan
This is a good quality intake that installs relatively easily. It took an hour or so to install and requires minimal skills and tools. The product came as described. It did not improve my fuel mileage but I can tell the truck runs better and the engine does not strain as much.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy aFe 54-10072 Cold Air Intake Kit

Compare Prices for aFe 54-10001 Air Intake System

aFe 54-10001 Air Intake SystemBuy aFe 54-10001 Air Intake System

aFe 54-10001 Air Intake System Product Description:



  • Stops more dirt and dust while reducing engine wear
  • Increases horsepower and torque
  • Improves fuel efficiency and throttle response
  • Includes instructions and hardware for easy installation
  • Uses factory mounting points

Product Description

aFe's cold air intake system replaces the existing OE air box and filter to stop more dirt and dust while reducing engine wear. It is designed to add horsepower and increase mid-range torque, along with improving fuel efficiency and improving throttle response. The cold air intake system includes the air box, filter, instructions and hardware for easy installation. The air intake system uses factory mounting points.

Customer Reviews

Most helpful customer reviews

1 of 2 people found the following review helpful.
5Highly Recommended!
By R. Sainer
The installation was just as described in the well laid out instructions. The entire kit is well made and the final look is very impressive. I did drill one small hole that was described in the instructions. This kit has made my 2002 Explorer Sport Trac sound real nice!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy aFe 54-10001 Air Intake System

Compare ARP 3347203 Pro Series Rocker Arm Stud Kit, Chrome Moly Steel With Black Oxide Finish, For Select Applications

ARP 3347203 Pro Series Rocker Arm Stud Kit, Chrome Moly Steel With Black Oxide Finish, For Select ApplicationsBuy ARP 3347203 Pro Series Rocker Arm Stud Kit, Chrome Moly Steel With Black Oxide Finish, For Select Applications

ARP 3347203 Pro Series Rocker Arm Stud Kit, Chrome Moly Steel With Black Oxide Finish, For Select Applications Product Description:



  • Manufactured to high tolerances so they run-in straight and true, and the extra-large radius base offers greater resistance to flex
  • Lengths are exact, designed to provide positive seating every time
  • Made from premium grade 8740 chrome moly steel and heat-treated to a tensile strength of 200,000 psi; designed for competition applications
  • Stud dimensions are: 2.100 overall stud height, .750 screw-in thread depth, .800 adjuster thread depth, 7/16-20 shank diameter and thread, and 7/16-14 base diameter and thread
  • Designed for use with ARP's patented Perma-Loc adjusters, not OEM-style self-locking nuts

Product Description

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. The solution? ARP quality. ARP rocker studs are concentric within .005 T.I.R. thread pitch to thread pitch. They run-in straight and true, and the extra-large radius base offers greater resistance to flex. Lengths are exact -- designed to provide positive seating every time. These Pro series rocker arm studs are from premium grade 8740 chrome moly steel and heat-treated to a tensile strength of 200,000 psi. ARP's patented Perma-Loc adjusters (available separately) should be used, not OEM-style self-locking nuts. It is highly advisable to determine what the optimum rocker arm stud length is for your particular application. This is especially true when "long" pushrods and valves are employed -- you should raise the "installed height" of the rocker arm to compensate for the longer-than-stock components. The dimensions for these studs are: 2.100 overall stud height, .750 screw-in thread depth, .800 adjuster thread depth, 7/16-20 shank diameter and thread, and 7/16-14 base diameter and thread.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5So far so good
By David H
Using these on a small block ford 302 engine with aftermarket aluminum heads. needed longer/more thread engagement for the rockers and place the rockers closer to the bottom of the stud and not on the threads that allow the rocker to pivot side to side due to the extra clearance.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy ARP 3347203 Pro Series Rocker Arm Stud Kit, Chrome Moly Steel With Black Oxide Finish, For Select Applications