Price Compare AEM 22-464R Red Short Ram Intake System

Buy AEM 22-464R Red Short Ram Intake System

AEM 22-464R Red Short Ram Intake System Product Description:

• AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
• Engineered to produce maximum horsepower and torque
• Manufactured and assembled in the USA
• 50-state legal or pending legality - Excluding intake systems that are designated as Off-Road Use Only.
• Guaranteed for life

Product Description

AEM Short Ram intake systems are an economical alternative to our Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. Our Short Ram intakes install easily under the hood and cost less because we use less material to manufacture them. During the development process, we found certain applications respond favorably to shorter inlet lengths over our longer Cold Air designs. For these applications (denoted in the search results page), we offer a Short Ram system only. We perform extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible. Please refer to our temperature testing procedures for more information.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Awesome SRI very easy to install BTW just need the right HEXSCREWDRIVER
By ooooogooooo
Very Nice intake, Easy to install and it sounds very nice on my is300 especially when VVTI engages =) Highly recommend this SRI if looking for a decent SRI

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons AEM 22-416B Blue Short Ram Intake System

Buy AEM 22-416B Blue Short Ram Intake System

AEM 22-416B Blue Short Ram Intake System Product Description:

• AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
• Engineered to produce maximum horsepower and torque
• Manufactured and assembled in the USA
• 50-state legal or pending legality - Excluding intake systems that are designated as Off-Road Use Only.
• Guaranteed for life

Product Description

AEM Short Ram intake systems are an economical alternative to our Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. Our Short Ram intakes install easily under the hood and cost less because we use less material to manufacture them. During the development process, we found certain applications respond favorably to shorter inlet lengths over our longer Cold Air designs. For these applications (denoted in the search results page), we offer a Short Ram system only. We perform extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible. Please refer to our temperature testing procedures for more information.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
2002 HONDA ACCORD V6....THIS IS THE ONE TO GET! PERIOD!
By jeff lejeune
Well, this is the best 140 dollars i have ever spent on my 2002 honda accord ex v6!! with 163, 000 miles, it lost a little pep in it's step, even though i keep up with regular maint meticiously. even had a k and n filter in the factory airbox,,,,,,, installed this intake in 30 minutes, started the car and let it idle for 5 minutes, then took it out on the highway. was not expecting much but a louder sound, but WOW , IM NOT KIDDING, ... THROTTLE RESPONSE WAS IMPROVED, RPM GAUGE SHOT UP LIKE IVE NEVER SEEN IT DO BEFORE, TRANSMISSION SHIFTED MUCH BETTER AND SMOOTHER, AND AS A 50 YR OLD MAN WHO KNOWS HIS CAR!!,THIS WAS NOT MY IMAGINATION!! AND THE SOUND IS JUST RIGHT,, AEM DRYFLOW FILTERS ARE THE WAY TO GO. NO OUTRAGEOUS FAKE SOUNDS THAT THE KIDS LIKE, BUT JUST A NICE, STRONG SUCKING SOUND.. FEEDING LOTS OF AIR THROUGH THE THROTTLE BODY!! GUYS, I BS YOU NOT, A FREAKING HUGE BIG BANG FOR THE BUCK VALUE !! AND LAST BUT NOT LEAST, THE INSTALLATION AND FIT AND INCLUDED HARDWARE MADE THIS A PLEASURE TO INSTALL!

0 of 0 people found the following review helpful.
Cold air Intake
By alf
A great product at a very good price, fits the car and improved the mileage ..... would buy it again .... nearly a five star !

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Discounted AEM 22-408B Blue Short Ram Intake System

Buy AEM 22-408B Blue Short Ram Intake System

AEM 22-408B Blue Short Ram Intake System Product Description:

• AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
• Engineered to produce maximum horsepower and torque
• Manufactured and assembled in the USA
• 50-state legal or pending legality - Excluding intake systems that are designated as Off-Road Use Only and is guaranteed for life
• 22-408B fits a 94-97 Honda Accord 2.2L

Product Description

AEM Short Ram intake systems are an economical alternative to our Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. Our Short Ram intakes install easily under the hood and cost less because we use less material to manufacture them. During the development process, we found certain applications respond favorably to shorter inlet lengths over our longer Cold Air designs. For these applications (denoted in the search results page), we offer a Short Ram system only. We perform extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible. Please refer to our temperature testing procedures for more information.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Intake
By hondaaccord
I have a 1996 Honda Accord LX . The intake fit but with filter that it comes with is a little long.You cant bolt it onall the way down because it will hit you head light. What i did is just bolt it down half way so it fits ok.If you get a smaller filter it would fit perfect.

0 of 0 people found the following review helpful.
i love it
By acole
I love it. it looks great on my Honda, it looks great and makes it sound so much cooler, so happy.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Where to Buy AEM 22-406P Polished Short Ram Intake System

Buy AEM 22-406P Polished Short Ram Intake System

AEM 22-406P Polished Short Ram Intake System Product Description:

• AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
• Engineered to produce maximum horsepower and torque
• Manufactured and assembled in the USA
• 50-state legal or pending legality - Excluding intake systems that are designated as Off-Road Use Only.
• Guaranteed for life

Product Description

AEM Short Ram intake systems are an economical alternative to our Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. Our Short Ram intakes install easily under the hood and cost less because we use less material to manufacture them. During the development process, we found certain applications respond favorably to shorter inlet lengths over our longer Cold Air designs. For these applications (denoted in the search results page), we offer a Short Ram system only. We perform extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible. Please refer to our temperature testing procedures for more information.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Good intake, great price
By ihsan
Most intakes are pretty similar these days, if you buy from a major brand and get the paper-style filter like this one has.About 5HP, and a lovely growl when you're on the gas (and a spectacular roar in VTEC if you're buying this particular one for a 5th Gen Prelude). Quite as a mouse when you're just putting around -- my friend has an adage: 'Intakes are for you, exhausts are for everyone else.'Why short-ram instead of a full cold air intake? I'm afraid of sucking water in when you have to drive through particularly deep puddles in low cars... But mainly because you'll actually check the condition of your filter.If you put that thing in the wheelwell, you won't remove the bumper all the time to look at it -- be realistic.With this particular installation, the battery will act as a heat shield, and keep the temps near ambient at the filter element. I checked with an infrared thermometer after runs at an autocross.

0 of 0 people found the following review helpful.
It's cool.
By roen
I don't have much knowledge about cars, but this was very easy to install. And it makes your car sound very nice when hitting the higher RPMs. People say this can give your cars more miles per gallon, but I don't think it does. Anyways, great mod part!

0 of 0 people found the following review helpful.
aem short ram
By steve corona
i received my product in less then 4 days!! i am completely satisfied! installation was easy and now my car sounds aggressive when it kicks into v-tech

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Compare AEM 21-564R Red Cold Air Intake System

Buy AEM 21-564R Red Cold Air Intake System

AEM 21-564R Red Cold Air Intake System Product Description:

• AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
• Engineered to produce maximum horsepower and torque
• Manufactured and assembled in the USA
• 50-state legal or pending legality - Excluding intake systems that are designated as Off-Road Use Only.
• Guaranteed for life

Product Description

AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
great product, amazing price.
By A. Kauffman
There are really only two names in Cold Air intakes, and AEM is one of them. This was by far the best price online, and with Amazon's fast shipping, and the safety of their top notch customer service, this is a no-brainer. Great instructions, easy install, and instant performance gains.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Sale AEM 21-513C Gun Metal Cold Air Intake System

Buy AEM 21-513C Gun Metal Cold Air Intake System

AEM 21-513C Gun Metal Cold Air Intake System Product Description:

• AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
• Engineered to produce maximum horsepower and torque
• Manufactured and assembled in the USA
• 50-state legal or pending legality - Excluding intake systems that are designated as Off-Road Use Only.
• Guaranteed for life

Product Description

AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
A great product with nice benefits.
By JK4LA
I purchased this as my first custom add on to my 2007 TL-s. I live in CA and was thinking about buying the AEM V2 pipe since it appeared to have slightly better spec ratings and reviews, but then found out the V2 wasn't CARB approved. :( If you live in CA and are worried about getting your car smoged legally, then the V2 pipe won't work. In my opinion after lots of research this AEM-21513 is the next best option. I got a great deal from Amazon and the pipe came with fast shipping (thanks 2 Amazon prime) and in excellent condition ready to install.The install process is a little tricky if you don't want to remove the entire front bumper. You'll have to gain access by taking off your tire and going through the wheel well cover. The biggest problem I had with the install was actually trying to get out all the OEM parts.(about 8 of them) There were a few bolts towards the upper part of the stock intake that seemed nearly impossible to access through only the wheel well. I ended up having to use a pry bar and break a piece of the stock box in order to remove everything. Just a warning if you don't plan to take off front bumper. It would also help if you have access to a lift instead of just a floor jack and stands. The instructions that came with AEM pipe weren't bad, but of course they give you generic instructions and all sub-models will vary a little on configurations. None the less, the bolt I removed to get out the stock box was not mentioned in the instructions. Overall from start to end it took me about 3 hours to do the entire job. I'm an intermediate DIY's and have pretty good mechanical skills and was a bit upset this took me as long as it did. Once the stock intake was out it only took about 30 minutes to install new AEM pipe and close everything up. Would have giving 5 stars if instructions mentioned the "hidden" bolt I needed to remvoe on stock parts.Overall, I think it was worth my time and money investment. I love the sound of this pipe as you drive down road. You can hear a slight whistle as it sucks in all the extra air. It's also looks good under the hood and has minimally helped with gas mileage. The h.p gain also seems pretty minimal, but still a noticeable improvement at first. I also enjoy the fact this is a dry filter and doesn't need to be cleaned or "re-charged" quite as often as other models out there. I might recommend also buying the 1-4000 Dry Flow Air Filter Wrap if you're worried about getting any water sucked up. Good luck on install if you buy and do yourself. :)

0 of 0 people found the following review helpful.
Perfect
By Henry
Makes my acura sound 10x louder when I floor it, also saves gas by 2-3 mpg (if your driving slow) install was quite easy and everything was there in the pakage ready to go. I would recommend buying this If you want your acura to stand out in front of the rest.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Cheap AEM 21-5002C Gun Metal Hybrid Air Intake System

Buy AEM 21-5002C Gun Metal Hybrid Air Intake System

AEM 21-5002C Gun Metal Hybrid Air Intake System Product Description:

• AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
• Direct fit intake for Hondas and Acuras with engine swaps - No modifications required
• Manufactured and assembled in the USA
• Three-inch aircraft aluminum inlet pipe delivers maximum flow for high-output motors
• Guaranteed for life

Product Description

So you’ve swapped an H22 into your EG Civic…now what do you do about getting an intake that fits? Do you order one for the chassis, or for the engine? Will a chassis system fit, or will it sacrifice performance, or both? Relax, we’ve done the R&D for you! AEM Hybrid intakes are direct-fit intakes for Hondas and Acuras with engine swaps, and eliminate the need to buy a system that doesn’t fit and have to cut it up, which voids the warranty. Hybrid intakes install using standard tools with no additional modifications. We designed our Hybrid intakes for high-output engines with internal engine modifications like cams and porting, and manufacture them using three-inch mandrel bent aircraft aluminum for maximum flow. Since we design our Hybrid intakes for cars with engine swaps, they are intended for off-road use only and are not 50-state legal.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Absolutely excellent!
By R. Reinke
I just got a motor swap completed into my 1991 Honda CRX Si and was looking for an air intake that wasn't 1. Going to break the bank or 2. Was not a custom hack job that I had done myself.Aside from getting the stock airbox out of the car (Just a note, if you take off the front right bumper turn signal, the second bolt for the resonator box is hidden behind it - that one took me a while to find. You're also going to either need a ratcheting wrench or a lot of patience and penetrating oil) the installation was super easy and took just about thirty minutes.The only thing that I am really concerned about is the filter coming off of the end of the tube, but I trust the quality of AEM and screwed that sucker on as tight as it would go.As for performance increases I can't really say on that because the air intake that I had on it before was the stock air system but was hacked together to get the car to and from the shop.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!