Affordable AIR LIFT 59554 Ride Control Rear Air Spring Kit

AIR LIFT 59554 Ride Control Rear Air Spring KitBuy AIR LIFT 59554 Ride Control Rear Air Spring Kit

AIR LIFT 59554 Ride Control Rear Air Spring Kit Product Description:



  • Fully adjustable air springs level your vehicle when towing or hauling a heavy load for a safe comfortable ride
  • Eliminate sag and bottoming out
  • Rugged durable components including air springs and all hardware
  • Easy to install with included instructions
  • Up to 2000 pounds of leveling capacity

Product Description

AIR LIFT Ride Control Rear Air Spring Kit is designed to adjust the air spring level of the vehicle while towing. It includes air spring, hardware and durable component. This kit eliminates sag and features 5000 pounds of leveling capacity. It facilitates easy and quick installation.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
5Easy to install
By J. Smith
I put this kit on my 08 Nissan Titan, it was easy to install, about 1 hour by myself. I have a leveling kit installed on the front and wanted to keep my truck level with/without a load. Before I put this kit on my truck it was about an inch lower in the rear, but with 20psi it leveled out. This kit on a Nissan Titan will lift the rear 2.5 inches with 80psi. I keep about 20-15psi with no load and 40-50psi with a 7000lb boat. I installed the air chucks on my top two license plate bolts, replacing the factory screws by drilling out the plastic mounts.The only problem I had was with a leak on one of the bags but with a little water and soap I found out that I needed to tighten the air bag fitting...leak fixed.Kit was installed a year ago...no problems works great.

0 of 0 people found the following review helpful.
5Air lift review
By ken Schule
I installed this on my 2005 f150 over 2 years ago, I have had no problems with leaks or anything else. Well worth the money. I am always hauling weather it be just the 4wheeler or a load of firewood in my dump trailer. Works great.

0 of 0 people found the following review helpful.
4Airliftt rear spring air kit.
By NEAL A REUST
They advertise 1 hour installation, it took me four hours. It involved putting a jack between the frame and axel to make room to fit the bags without distorting them. One u-bolt was instlled upsidedown to avoid interference with brake line.Other than a little hassle with installation they're great. Only 15lbs pressure brings me back to level with my travel trailer.Amazon price beat all other advertised prices, and shipping was free.

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy AIR LIFT 59554 Ride Control Rear Air Spring Kit

Price Comparisons AIR LIFT 57345 LoadLifter 5000 Series Rear Air Spring Kit

AIR LIFT 57345 LoadLifter 5000 Series Rear Air Spring KitBuy AIR LIFT 57345 LoadLifter 5000 Series Rear Air Spring Kit

AIR LIFT 57345 LoadLifter 5000 Series Rear Air Spring Kit Product Description:



  • Fully adjustable air springs level your vehicle when towing or hauling a heavy load for a safe comfortable ride
  • Eliminate sag and bottoming out
  • Rugged durable components including air springs and all hardware
  • Easy to install with included instructions
  • Up to 5000 pounds of leveling capacity

Product Description

AIR LIFT LoadLifter 5000 Series Rear Air Spring Kit is designed to level the load of the vehicle while towing. It includes air spring, hardware and durable component. This kit eliminates sag and features 5000 pounds of leveling capacity. It facilitates easy and quick installation.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5excellent leveling system
By Mr. Wendell D. Morgan
air lift products got their act together with this system easy to install just takes more time than they say unless you have a garage. great install instructions and well thought out design. installed it on a 2001 f450 with the wireless air controller 72000 works very well thanks wdm.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy AIR LIFT 57345 LoadLifter 5000 Series Rear Air Spring Kit

Compare Prices AIR LIFT 50259 Replacement Sleeve

AIR LIFT 50259 Replacement SleeveBuy AIR LIFT 50259 Replacement Sleeve

AIR LIFT 50259 Replacement Sleeve Product Description:



  • Exact replacement for original Air Lift air spring
  • Sturdy rubber construction with synthetic fabric reinforcement
  • Genuinte high strength rustproof Zytel endcaps
  • Inverted crimp design helps bag hold shape for long life
  • High burst pressure

Product Description

AIR LIFT Replacement Sleeve is designed to replace air spring when it is heavily damaged. It is made from rubber with synthetic fabric reinforcement which ensures extreme durability. This sleeve features genuinte high strength rustproof zytel end caps. It consists of Inverted crimp design which helps the bag to retain its shape and has high burst pressure.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Great Product
By xwave
Great product and speedy shipping. It made a big defference in the driving and comfort in my truck. I recommend these to all truck owners!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy AIR LIFT 50259 Replacement Sleeve

Low Cost AIR LIFT 25812 Load Controller II Air Compressor System

AIR LIFT 25812 Load Controller II Air Compressor SystemBuy AIR LIFT 25812 Load Controller II Air Compressor System

AIR LIFT 25812 Load Controller II Air Compressor System Product Description:



  • Economically priced on board air compressor system
  • Perfect for light or medium duty applications for air springs
  • Includes compressor and gauge and wiring harness
  • Low pressure sensor automatically activates compressor if pressure drops
  • Dual path system controls two air springs independantly or controls four springs two at a time

Product Description

AIR LIFT Load Controller II Air Compressor System includes compressor and gauge wiring harness. It features low pressure sensor which automatically activates the compressor. This system inflates two air springs at the same time and facilitates easy installation.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
5convenient way to control your rear air bags
By J. Luong
Must have if you're getting the Air Lift kit. Beats having to go to the gas station and manually inflating/deflating each bag. Easy adjustability and nice to see how much air are in the bags. Always leave at least 10PSI in the bags no matter what.

2 of 2 people found the following review helpful.
4Nice way to control airbags
By Lorgan
Works well. I have two minor feature requests.1. Make a switch to disable "low pressure" feature, or add some damping to it. I run the bags at 5psi a lot when the vehicle is empty, and it goes on/off over every bump. I added a switch that lets me disable the feature when I want.2. Dual gauge setup is unnecessary. They have another (more expensive) product with a single gauge with 2 needles. They should use that same gauge for this.

2 of 2 people found the following review helpful.
5Load Cotroller
By P. Soccio
If you are hauling heavy loads and running air bags this is a must have item. I haul a slide in truck camper as well as pull my jeep behind it, around 12,000lbs. The air bags take care of what I call the boat feeling going down the road and the controller makes it easy to adjust the spring with out having to drive all over looking for and air pump.

See all 8 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy AIR LIFT 25812 Load Controller II Air Compressor System

Discount CURT Manufacturing 110763 Class 1 Trailer Hitch with Old-Style Ball Mount, Pin and Clip

CURT Manufacturing 110763 Class 1 Trailer Hitch with Old-Style Ball Mount, Pin and ClipBuy CURT Manufacturing 110763 Class 1 Trailer Hitch with Old-Style Ball Mount, Pin and Clip

CURT Manufacturing 110763 Class 1 Trailer Hitch with Old-Style Ball Mount, Pin and Clip Product Description:



  • 1.25 In. receiver tube opening
  • Gross Trailer Weights (GTW) and Tongue Weights (TW) vary by application
  • Never exceed vehicle weight rating
  • Old-style ball mount, pin and clip included
  • Made in USA. Limited lifetime warranty to original purchaser

Product Description

CURT Manufacturing focuses on being first-to-market with our new custom fit hitch designs. CURT is the only hitch company in the industry that mechanically de-scales all of our hitches before applying a thick powder coat finish leaving an attractive high-gloss, smooth surface. You will have no worries about your product rusting, as CURT features WeatherTite™ construction which seals the main body of the hitch. All CURT hitches come with mounting hardware and easy to follow installation instructions. Our class 1 hitches have a 1 1/4 In. receiver opening, and rate up to 2,000 Lbs. gross trailer weight (GTW) and 200 Lbs. tongue weight (TW). This Trailer Hitch includes a standard CURT ball mount with a pin and clip. We're so confident in the quality of our trailer hitches that we back them up with a limited lifetime warranty and a one year finish warranty.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
5Nice hitch- easy to install
By R. Greenfield
Took less than an hour to install. Word of caution- the hitch attaches to the assembly line tow loop. In my car it was bent down a little so if I installed the hitch without fixing it, the hitch would have been tilted down. Had to beat it straight before installing. Make sure that the hitch is straight side to side and top to bottom before drilling. Also, the hitch won't touch the sides of the spare tire well at the bottom, just the top. As long as you crank the bolts all the way down, it will pull the body against the mount. Also, the instructions say to trim the bumper. Not necessary. Just push the bumper skin out of the way to tighten the tow loop bolt.Instructions:http://sitepro12.sitepro.com/masterlibrary/11076/installsheet/CM_11076_INS.pdf

0 of 0 people found the following review helpful.
4Decent quality, could be better
By svenson
Like all Curt products, this one looks ok when new. The paint quality is average and only lasts a year or two here in the salty winters before flaking off. Metal preparation seems to be missing with the cost cutting.Another annoyance: I used to have an acct. and received 'jobber' pricing directly from Curt. When I called regarding this one, the price they quoted was almost $50 more, PLUS shipping, than what I paid here through a reseller. Odd business concept.All in all, for what I paid here for it, not a bad deal. Had I paid full 'jobber' rate I might have looked elsewhere for a hitch this time around.

0 of 0 people found the following review helpful.
4Good hitch for the money
By rktvikesfan
I purchased this hitch for a 2003 VW Passat. It installed rather easy but be prepared to do some tactful drilling. The holes could not be drilled from under the car so I had to drill a small pilot hole at an angle and the drill another small hole from inside the trunk and then drill the larger hole and "hope to get it in the right spot. I also manufactured a brace for the two bolts to re-enforce them as I was not to confident in the washers that came with the hitch. I would suggest having an extra pair of hands to help out and I believe you should be somewhat mechanically incline to install it. Final product looks good on the car though. I don't regret buying it. Good luck.

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy CURT Manufacturing 110763 Class 1 Trailer Hitch with Old-Style Ball Mount, Pin and Clip

Affordable Aeromotive 13110 Pro-Series EFI Regulator

Aeromotive 13110 Pro-Series EFI RegulatorBuy Aeromotive 13110 Pro-Series EFI Regulator

Aeromotive 13110 Pro-Series EFI Regulator Product Description:



  • Aeromotive Fuel Pressure Regulator - Pro-Series EFI - NON APPLICATION SPECIFIC - 0 - 0 - 13110 - ALL

Product Description

Pro Series Boost Reference EFI Regulator: Applications up to 2000 HP; 30-60 Adjustable Base Pressure

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
4Aeromotive 13110 (Via Amazon)
By D. J. Rice
Love everything about this part (except the price )Superb quality.Fit like a dream.Amazon had the best price out there.No service or handling fee's.I always shop ALL of my race parts at Amazon.Sure, it can be hit or miss, but the savings goes right back into the race car.Happy buyer.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Aeromotive 13110 Pro-Series EFI Regulator

Discount Aeromotive 13101 A1000 Series Injected Bypass Fuel Regulator

Aeromotive 13101 A1000 Series Injected Bypass Fuel RegulatorBuy Aeromotive 13101 A1000 Series Injected Bypass Fuel Regulator

Aeromotive 13101 A1000 Series Injected Bypass Fuel Regulator Product Description:



  • A1000 Injected Bypass Regulater: Applications up to 1000 HP; 30-70 PSI Adjustable Base Pressure; Two -10AN Inlet Ports One -6AN Return Port;

Product Description

A1000 Injected Bypass Regulater: Applications up to 1000 HP; 30-70 PSI Adjustable Base Pressure; Two -10AN Inlet Ports One -6AN Return Port;

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Nothing needs to be said.
By D. Sutton
There isn't much to say about this product that is not already known. High quality regulator from a company known for quality stuff.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Aeromotive 13101 A1000 Series Injected Bypass Fuel Regulator