Get Cheap Borla 40941 Oval XR-1 Stainless Sportsman Racing Muffler

Buy Borla 40941 Oval XR-1 Stainless Sportsman Racing Muffler

Borla 40941 Oval XR-1 Stainless Sportsman Racing Muffler Product Description:

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
• Inlet Diameter: 2 1/2" Outlet Diameter: 2 1/2" Case Size: 12" x 4 1/2" x 7 7/8"

Product Description

Borla's T-304 stainless steel high performance muffler is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Lightweight and good sound
By M. Kawada
On a Toyota Tacoma X-Runner:Replaced an unknown Magnaflow offset-center with this Borla center-center (turns out I had 3" piping, not stock 2.5" and the muffler Amazon shipped me was 3"...lucky mistake for me). Both mufflers were about the same size yet the Borla was much lighter and the sound increased--this is what I was aiming for though. There's just a little drone, not an annoying level, and it has a really nice cold-start growl. I haven't opened it up so can't comment on high-revving sound, but everything below 3k rpm is mild...can't imagine it sounding bad at 4k or 5k.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best Price Borla 20156 Single Round Rolled Angle-Cut Tip w/ Clamp, Borla Embossed

Buy Borla 20156 Single Round Rolled Angle-Cut Tip w/ Clamp, Borla Embossed

Borla 20156 Single Round Rolled Angle-Cut Tip w/ Clamp, Borla Embossed Product Description:

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
• Outlet Size: 4"x4" Inlet Size" 2 1/2" Length 6 1/4"

Product Description

Borla's T-304 stainless steel high performance tip is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Customer Reviews

Most helpful customer reviews

0 of 3 people found the following review helpful.
Exellent Tip
By Jade chopstick
I satify with this tip becuse one thing you'll like is it's big and it grab most of people eyes cause of the Borla LOgoThe performance is very good. I feel that my car run smoothier than usual. It's increase 7% horse power The sound is great too. But not that loud its soft. The clamp is superb. Can't believe it that I watch at this tip after installation for one hour.I love it. Way to go , I'm the borla fan now.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Cheapest Borla 17217 Header

Buy Borla 17217 Header

Borla 17217 Header Product Description:

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.

Product Description

Borla's T-304 stainless steel high performance header is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Customer Reviews

Most helpful customer reviews

0 of 2 people found the following review helpful.
Best bang for buck
By JDnetw0rx
Purchased these from another well known suby parts place. Noticable mid-top end power gain, loss of boxter sound. With my Blitz nurspec its kind of hard to tell unless your stock.Fitment a+, works well in conjunction with INJEN cross-over pipeCurrent modsTo many to list

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Low Cost Borla 17183 Header

Buy Borla 17183 Header

Borla 17183 Header Product Description:

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.

Product Description

Borla's T-304 stainless steel high performance header is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Excellent Sound
By B. Lewis
Installed on 1999 Subaru Forester (2.5L SOHC.) With this paired to the stock muffler, you get a deeper sound, but still not loud at all. Quite quiet in fact. Paired with a Borla cat-back, this thing roars and sounds great. This will give you the boxer rumble you're looking for if it's paired with the appropriate exhaust system.One downside, after installing this, I can't attach my skidplate. The alternative piping interferes. Of course, that's not this product's fault as the skidplate is aftermarket and there's no way Borla could've designed this to be compatible. The stock plastic dust shield I'd imagine works fine with this.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons of Borla 14990 Cat-Back System Exhaust

Buy Borla 14990 Cat-Back System Exhaust

Borla 14990 Cat-Back System Exhaust Product Description:

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
• Includes a split side exit single round rolled angle-cut tip

Product Description

Borla's T-304 stainless steel high performance exhaust system is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
It's a growler
By ww2hd
I bought this for a 3500 crew cab duellie. The manufacturer said it would fit even though this model was not listed as being compatable. They were right. I had it put on by a muffler shop in case any modifications were needed. My cost for installation 100.00. Picked it up and was amazed by the sound but also the get up and go off the start. I noticed a huge difference in the low end torque right away. Modestly loud in the cab, not overpowering. Am checking now to see if any gas mileage improvements will be seen but not likely on the first tank as I have a tendency to hit the gas a little harder at the start to get the feel and the sound. This will hopefully wear off after a little while.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Where to Buy Borla 14964 Cat-Back Exhaust System

Buy Borla 14964 Cat-Back Exhaust System

Borla 14964 Cat-Back Exhaust System Product Description:

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
• Includes a split side exit single round rolled angle-cut lined resonated tip

Product Description

Borla's T-304 stainless steel high performance exhaust system is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
excellent fit for the Suburban
By Geno
Well i installed this exhaust on my Z71 Suburban and it sounds great. On the driver's side i had to push the trim panel up 1/2 inch but other than that it fit perfect. Throaty sound and i now get 19 mpg at highway speeds when before I was getting 15. And it is made superior of T-304 stainless steel, which never rusts. Beware if you stay up north aluminized steel exhausts and 409S exhausts,which will rust out,some quicker than others. Borla has a million miles warranty that will outlast your car. A little more money but less headaches in the long run!!!!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Sale Borla 14836 Cat-Back System Exhaust

Buy Borla 14836 Cat-Back System Exhaust

Borla 14836 Cat-Back System Exhaust Product Description:

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
• Includes a rear exit single round rolled angle-cut tip

Product Description

Borla's T-304 stainless steel high performance exhaust system is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
Excellent cat-back system
By HollyhoodBob
Received in two days as promised by Amazon. I've worked on vehicles before, but this was the first exhaust I've put on so I decided to get the cat-back kit. It went on flawlessly in around 2 hours. Save yourself the headache when taking off the old exhaust and make sure you at least have a saws-all (a grinder is a plus for cutting and polishing the old pipes).After installation I immediately noticed an HP difference and the Avg MPG gauge is telling me I'm already getting an extra 1MPG (even with running it hard to test it out). The sound is throaty, but not annoyingly loud.Please note I do have a K&N cold air intake installed as well. My catalytic converter is stock. I put it on a 4.0L 2000 Jeep Grand Cherokee. Directions for installation are available on the Borla website.I highly recommend this cat-back and will buy Borla again when putting my Jeep Wrangler back on the road.

3 of 3 people found the following review helpful.
...Just the perfect sound.
By Michael L. Disalvo
The Borla exhaust system was extremely easy to put on. the hardest part was getting my stock exhaust off. The exhaust system looks great withthe chrome "Borla" written tip and the stainless steel piping and muffler. all this makes just the perfect sound. the perfect grrrr when you give it gas and the quite when your highway cruising and at idle. the perfect system.

2 of 2 people found the following review helpful.
Borla exhaust for my 2000 Jeep GC Laredo 4.0L
By Mike August
The Borla system is of extremely high quality and is sure to out-live the vehicle. I installed it on my 00' Grand Cherokee Laredo 4.0 L after I put a new engine in it. I know it's overkill, but there was some decay on the OEM system, the Borla was a good buy and the fresh motor & fresh exhaust is a nice combo! It'll serve my daughter for a long time.It fits great, sounds nice and looks very durable. (I'd really like to hear it installed on a 4.7l v8 model!)

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!