Price Compare Borla 140035 Cat-Back Aggressive System Exhaust

Buy Borla 140035 Cat-Back Aggressive System Exhaust

Borla 140035 Cat-Back Aggressive System Exhaust Product Description:

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
• Includes a rear exit dual round rolled angle-cut tip

Product Description

Borla's T-304 stainless steel high performance exhaust system is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Borla 140035 Cat-Back "03" Mini Cooper
By TFB
Borla 140035 Cat-Back installed on a 2003 Mini Cooper S John Cooper Works. This exhaust arrived in just a few days and was well packaged.Install was easy. Once the old exhaust is off install the Borla, but don't tighten the clamps at that time. This will allow you adjust the exhaust for a perfect fit. Start at the tailpipe and tighten you clamps and work forward. From start to finish it took me two hours.The sound is perfect. At idle it's not much louder than the factory exhaust, but once you put your foot into it this exhaust comes alive. This is how Coopers should sound.

0 of 0 people found the following review helpful.
mini cooper s borla 140035 exhuast
By roger s
generally product met expectations, it was missing a key gasket which cost $35 and one of the muffler hangers needed to be modfified to avoid contact with body

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Online Borla 140006 Cat-Back Exhaust System

Buy Borla 140006 Cat-Back Exhaust System

Borla 140006 Cat-Back Exhaust System Product Description:

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
• Includes a split rear exit single round rolled angle-cut lined resonated tip

Product Description

Borla's T-304 stainless steel high performance exhaust system is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Worth the money
By BobbyZ
I love this exhaust, it's quiet when cruising on the highway, yet gives you a nice exhaust note whenever you're on the throttle. It runs close to the left rear brake lines so I wrapped some thermo-shield around them and everything has been fine after close to 1,000 miles. Worth the money, it has a much classier sound than most other brands and gave my car a slight boost in power above about 2,000 rpms. Cost of install was $100. If you're thinking about spending $800 on a Magnaflow do yourself a favor and spend the extra $200 on the Borla!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best Price B & G Suspension Systems 92.1.074 S2 Sport Vehicle Lowering Spring

Buy B & G Suspension Systems 92.1.074 S2 Sport Vehicle Lowering Spring

B & G Suspension Systems 92.1.074 S2 Sport Vehicle Lowering Spring Product Description:

• Lowers vehicle: front-1.6 inch, rear-1.6 inch
• Progressive spring rate design to maintain ride quality while improving road feel and handling
• Cold wound from high tensile chromium silicone wire and individually super blocked and computer tested against tight tolerances
• ISO9001, QS1400, and TUV ceritfied
• Limited lifetime warranty

Product Description

S2 Sport lowering springs are engineered to improve handling while maintaining safety and ride quality. B&G lowering springs are wound from high tensile chromium-silicone wire purchased from Europe's premium mines. The lowering springs are cold wound on CNC coilers, heat treated and shot peened for longevity, finished with phosphate treatment and baked on resin powder coating for a hard corrosion resistant shell. By redesigning the O.E. spring and the lowering the center of gravity from 0.5-2.5 inches depending on vehicle and application, B&G's technicians dramatically improve your vehicles performance and appearance. Incorporating a progressive rate design allowing B&G lowering Springs to offer higher rates for improved road hold, while maintaining a comfortable ride.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Great kit at amazing price!
By Oliveira
The spring kit is very well made, good paint quality. It provides amazing ride quality, was even more confortable then the stock springs in my Corolla. The stance it provides is very good, it lowered my car even more then I was expecting (perhaps 0.3" higher would have been better).I was between this kit and the Eibach pro kit, chose this one because the Eibach is sayed to lower only 1.1", while this one was 1.6", and the price for the B&G ended up being lower. However after I saw it lowered a little more then expected, perhaps I should have tried the Eibach that probably lowers more then the 1.1" as well and I know the brand better.The only dissapointment with this kit is that it doesn't come with some kind of manual, warranty card, paper with its safety and quality certificates, or even a congratulations on your purchase letter. The only thing that comes in the box is the four springs. Kind of expected something more, felt a little cheap instead of a high quality professional company.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Cheapest Bully Dog 181014 3" Down Pipe

Buy Bully Dog 181014 3" Down Pipe

Bully Dog 181014 3" Down Pipe Product Description:

• Reduced exhaust gas temps up to 200 degrees
• 16 gauge aluminized steel
• Constructed from 16 gauge aluminized tubes
• Allows the turbo to move air freely
• Decreases the exhaust temperature

Product Description

Bully Dog Technologies' Rapid Flow Exhaust Systems are designed and built with absolute minimal degree angles on bends. This will create the most free flowing low back pressure system in the industry allowing the turbo to move air more freely, reducing exhaust temperatures. Dyno Results have shown a 10-20 horsepower gain in horsepower be simply switching from tock to a Rapid Flow Exhaust System. This will also lower exhaust temperatures by as much as 200 degrees depending on size upgrade and horsepower output.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Standard downpipe
By M. Hajduk
Straight forward downpipe. It's a 2 piece pipe so it's easier to put in. I bought it from this seller for $76 and free shipping so if it's more expensive than that, theres a ton of 2 piece down pipes out there for under $100.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices for Airaid 400-596 PowerAid Throttle Body Spacer

Buy Airaid 400-596 PowerAid Throttle Body Spacer

Airaid 400-596 PowerAid Throttle Body Spacer Product Description:

• Installs in minutes with simple hand tools
• Comes with all required hardware for a clean installation
• Improves low-end torque and throttle response
• Backed by a "no hassle" lifetime warranty

Product Description

The Airaid PowerAid Throttle Body Spacer is developed to enhance off-idle torque, from 800 RPM to approximately 3,000 RPM. It incorporates a patented helix bore, which causes a spinning action of the incoming air-charge as it passes through the throttle body spacer. This improved air-charge carries all the way into the combustion chamber, producing a super-atomized mixture, which produces tremendous gains in mid-range power and overall combustion efficiency for better fuel economy.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Fantastic
By harry waring
This product is great. It is a really easy install and I installed it at the same time I did with a K&N CAI. There is a noticeable difference in low end torque as it spools the air into the manifold. Also creates a low whistling noise which is an added bonus.Overall I would recommend this as it helps improve my MPG and adds a little bit of power off the line. Easy install, you can easily do this yourself.Installed on a 2000 F-150. High recommended.

1 of 2 people found the following review helpful.
Too Early to tell
By Stephen Greene
Got this in todays mail. I'm not much of a mechanic but it took me about 20 minutes to install. Took longer to find all my tools, and it only requires three of them.Anyway, I was worried when I went to start it, but it started right up. Went up to the store to get what the wife forgot for dinner, and I can really feel a difference in the response when I put my foot down.I am curious about the mileage it might save and I look forward to that. The mileage thing is the only reason I didn't give it five stars.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Sale Airaid 400-527 PowerAid Throttle Body Spacer

Buy Airaid 400-527 PowerAid Throttle Body Spacer

Airaid 400-527 PowerAid Throttle Body Spacer Product Description:

• Installs in minutes with simple hand tools
• Comes with all required hardware for a clean installation
• Improves low-end torque and throttle response
• Backed by a "no hassle" lifetime warranty

Product Description

The Airaid PowerAid Throttle Body Spacer is developed to enhance off-idle torque, from 800 RPM to approximately 3,000 RPM. It incorporates a patented helix bore, which causes a spinning action of the incoming air-charge as it passes through the throttle body spacer. This improved air-charge carries all the way into the combustion chamber, producing a super-atomized mixture, which produces tremendous gains in mid-range power and overall combustion efficiency for better fuel economy. It fits FORD BRONCO 1987-1995 V8 5.0L, V8 5.8L and FORD PICKUP F-150 1987-1995 V8 5.0L, V8 5.8L .

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Great Product!!!!!
By David Bar
I personally would only get this spacer if you plan to upgrade to a high performance cold air intake. You truly can feel and hear a difference in your power.I had this on my 92 Ford F150 with the 5.8 windsor

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Airaid 350-171 Intake System

Buy Airaid 350-171 Intake System

Airaid 350-171 Intake System Product Description:

• Dyno-testing has resulted in gains of up to 18 horsepower
• Boosts torque, power and fuel economy
• Direct-fit filter is washable and reusable
• Emissions legal
• Backed by a "no hassle" lifetime warranty

Product Description

The Airaid Quick Fit Intake System is designed to isolate engine heat away from the air intake for maximum power and torque. This intake uses the stock air filter location, to ensure cool outside air, but enhances air flow with a huge air inlet and 360 degree SynthaFlow filter for maximum air flow and filtration. This results in a cool, dense air charge which means more horsepower and torque. SynthaFlow features a 5 layer construction with an exclusive final layer assuring the best filtration and cleanest air possible. Specially designed splash shields protect the filter from engine heat and inclement weather. These systems are easy to install with basic hand tools.

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
Quality Product!
By Ken Willaert
Recently installed on an '06 Dodge Charger (3.5 L engine). Looks great under the hood, easy/effortless install, well built and sturdy product.

1 of 2 people found the following review helpful.
AIRRAID
By Michael Zastrow
This was simple to install. It only took a few minutes. My car feels peppier, but I haven't seen any gas milage improvment.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!