Buy Firestone W217602330 Ride-Rite Kit for Ford F-250SD/350Firestone W217602330 Ride-Rite Kit for Ford F-250SD/350 Product Description:
- Levels vehicle front-to-rear and side-to-side
- Stabilizes vehicle while loaded and maximizes vehicles load carrying capacity
- Adjustability is between 5-100 Pascal per square inch
- Used on pick-ups, class A,B,C motorhomes, vans, commercial vehicles and SUV's
- Kit includes air springs, air line, fasteners, upper and lower brackets, inflation valves, push-to-connect air fittings and detailed instructions
Product Description
Ride-Rite air helper springs mount between the frame and the suspension of light-trucks, vans, and motorhomes. The heavy-duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200-5,000 pounds per set. Ride-Rite air helper springs will level the vehicle front-to-rear and side-to-side, stabilize the vehicle while loaded, maximize vehicles load carrying capacity and features adjustability 5-100 Pascal per square inch. Each kit is weighed to ensure component count and each air spring is pressure tested before leaving the factory. Over 1 million cycle life test. It is ISO certified. Can be used on pick-Ups, class A,B,C motorhomes, vans, commercial vehicles and SUV's. The Kit includes air springs, air line, fasteners, upper and lower brackets, inflation valves, push-to-connect air fittings and detailed instructions.
Customer Reviews
Most helpful customer reviews
3 of 3 people found the following review helpful.
Air Bag Review
By Hal M. Clark
I tow a heavy 5th wheel with a 2003 F350 and this kit was able to raise my hitch to level the RV which distributes the load over the RV axles. I have a Reese Signature hitch and I had to remove the side plates on the frame in order to install the air bags which adds a bit to the install time and the side plates reinstalled without any interference to the bolt heads used to attach the air bag brackets since the frame joggles in just enough to clear the bolt heads. An alternative would be to drill a large hole in each side plate to allow the bolt to go through but I think that would have been more work and would weaken the side plates. I wanted to connect both air lines together but the kit did not have a Y fitting so I had to buy one. This allowed me to install a single air valve next to the fuel filler hose inside the fuel access door which allows me to use my small air compressor that plugs into my cigarette lighter. The recommended location in the rear would have been too far away for the power cord on my compressor to reach. If you do this do not cut the air line in half since one side will be a longer run than the other. I ran the long line first and cut it when I knew the needed length which left enough for the shorter run. I run about 50 psi to obtain the desired height. Be aware that 20 psi when unhitched becomes 45 psi when hitched with about 3500 lbs hitch weight.
1 of 1 people found the following review helpful.
Great product
By ret10214
Worked great as described....installation took about 3 hours with the help of a friend.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
