Buy AEM 21-506R Red Cold Air Intake SystemAEM 21-506R Red Cold Air Intake System Product Description:
- AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
- Engineered to produce maximum horsepower and torque
- Manufactured and assembled in the USA
- 50-state legal or pending legality - Excluding intake systems that are designated as Off-Road Use Only.
- Guaranteed for life
Product Description
AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty.
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
In the end its worth it.
By 04 RSX
Watch Video Here: http://www.amazon.com/review/R1LKOV0FPH5Q18 Bought this for my 2004 type S and am overall very happy with it.The installation instructions are surprisingly detailed in some portions, and completely lacking in other portions. (It jumps from removing the inner fender wall and taking the windshield washer bottle off, to the entire tube being installed already and mounting it in. (You route it through the wheel well if you were curious, but I found this out on my own.) As far as a cold air intake goes, the difficulty on this particular one is probably an 8 out of 10. It took me and a buddy about 5 full hours to get it done. (Probably 45 minutes of that was wasted time looking for tools) but it is a very in depth process as far as an intake goes.It does require cutting of the inner fender plastic on the drivers front wheel.(nothing crazy, I did it without even removing the fender plastic) It may be smart to have some extra fasteners at your disposal for when you accidentally break them in the process of removing the wheel well plastic. And if you're buying the intake for show you will be sorely disappointed. of the entire 24+ inch system, if you install it correctly you will have about 4 inches of visible intake, and the rest is hidden unless you really look for it. I was okay with this, because the paint these intakes are painted with is very fragile and I royally scratched the %@#$ out of my intake while trying to wiggle it into place.Performance wise, there is a very real difference in sound of the engine. If you're driving slowly and not really hitting the gas too hard, you're not going to be able to tell a difference, but if you hit the gas hard the engine has a very nice low growl to it. My friend compared it to my Suzuki650 which had a two brothers pipe on it. The car is not too loud at all, but definitely noticeable.Power wise, all I've really noticed is a bit more low end torque, which is what these cars seem to lack a little. So the torque before you hit the vtec is actually improved a bit. Also there is a much more noticeable sound difference when the Vtec kicks in.The only issue, that I see...The intake is very very low to the ground. It sits right behind the lower vents on your front bumper. About 12 inches off the ground. If you're worried about sucking up water, grab yourself an Injen HydroShield. That's what I did. If you're looking for something more showy and less performance (also a bit safer) check out the Injen V2.Overall very happy with the product.
See all 1 customer reviews...Latest Price:
See on Amazon.com!
More Info:
See on Amazon.com!
See Customers Review:
See on Amazon.com!
Buy AEM 22-450R Red Short Ram Intake System
Good Buy
